garden lights fixing

The problem of finding

The first thing you should do something, fixing blocked garden lighting to find the point where the flow is updated. If the house lights, other people working in the same line, the problem is not the main transformer or the power cord. Probably a connection problem in a unique garden light. The link between the problem could be the lamp and the cable industry there,Cable and bulb in the bulb.

Now you need to check if the connection is loose at the point where you attach the lamp cable is the main line. You may need to dig a trench deep enough on one foot, if the lighting is one meter, where the lights go down, the supply of electricity.

To resolve the problem

This is not to lose these relationships are rarely easy. Metal rods are asked to try several timesobtain good contact. When connecting light could go to, then again, what a bad connection. The hardest part may be a good connection with metal rods, the son of metal that are within the level.

Most bulbs of garden with screw fittings are different from ordinary light bulbs in the house that are in the files. If you are a flood light low voltage, ports on the back of the clip lightscable ends to press, and then the ads are in contact with the metal tabs located at the rear unit. Some are garden lights, light bulbs, which can be taken and implemented easily.

Changing the bulb may be an occasion to renew the bulb. A new lamp may also be connected with cables, and the problem will be solved. Otherwise, return to the main power line yet, and yet the contact betweenmetals in the sheath of cables. One of these points may be a connection problem. After some trials and error sessions will be possible to fix the light.

Once the garden lights are fixed, plug the cable. Then add the lights to the desired position. Connect the power cord and control switch to try. Change of different mechanisms may be used. Of course, should be handled with care to avoid any risk of electrocution.